Article | July 29, 2020
1. Zero Trust – Demystified
Everyone seems to be talking about Zero Trust in the security world at the moment. Unfortunately there seems to be multiple definitions of this depending on which vendor you ask. To help others understand what Zero Trust is, this white paper covers the key aspects of a Zero Trust model.
1.1. What is Zero Trust
Zero Trust is a philosophy and a related architecture to implement this way of thinking founded by John Kindervag in 2010. What it isn’t, is a particular technology!
There are three key components to a Zero Trust model:
1. User / Application authentication – we must authenticate the user or the application (in cases where applications are requesting automated access) irrefutably to ensure that the entity requesting access is indeed that entity
2. Device authentication – just authenticating the user / application is not enough. We must authenticate the device requesting access as well
3. Trust – access is then granted once the user / application and device is irrefutably authenticated.
Essentially, the framework dictates that we cannot trust anything inside or outside your perimeters. The zero trust model operates on the principle of 'never trust, always verify’. It effectively assumes that the perimeter is dead and we can no longer operate on the idea of establishing a perimeter and expecting a lower level of security inside the perimeter as everything inside is trusted. This has unfortunately proven true in multiple attacks as attackers simply enter the perimeter through trusted connections via tactics such as phishing attacks.
1.2. Enforcing the control plane
In order to adequately implement Zero Trust, one must enforce and leverage distributed policy enforcement as far toward the network edge as possible. This basically means that granular authentication and authorisation controls are enforced as far away from the data as possible which in most cases tends to be the device the user is using to access the data. So in essence, the user and device are both untrusted until both are authenticated after which very granular role based access controls are enforced.
In order to achieve the above, a control plane must be implemented that can coordinate and configure access to data. This control plane is technology agnostic. It simply needs to perform the function described above. Requests for access to protected resources are first made through the control plane, where both the device and user must be authenticated and authorised. Fine-grained policy can be applied at this layer, perhaps based on role in the organization, time of day, or type of device. Access to more secure resources can additionally mandate stronger authentication. Once the control plane has decided that the request will be allowed, it dynamically configures the data plane to accept traffic from that client (and that client only). In addition, it can coordinate the details of an encrypted tunnel between the requestor and the resource to prevent traffic from being ‘sniffed on the wire’.
1.3. Components of Zero Trust and the Control Plane
Enforcing a Zero Trust model and the associated control plan that instructs the data plane to accept traffic from that client upon authentication requires some key components for the model to operate. The first and most fundamental is micro-segmentation and granular perimeter enforcement based on:
Their devices and its security posture
Their Context and other data
The above aspects are used to determine whether to trust a user, machine or application seeking access to a particular part of the enterprise.
In this case, the micro-segmentation technology essentially becomes the control plane. Per the above section, encryption on the wire is a key component of Zero Trust. For any micro-segmentation technology to be an effective control plane, it must:
Enforce traffic encryption between endpoints
Authenticate the user and machine based on their identity and not the network segment they are coming from.
1.4. Zero Trust Technologies
As stated earlier, Zero Trust is an architecture. Other than micro-segmentation, the following key technologies and processes are required to implement Zero Trust:
Multifactor authentication – to enforce strong authentication
Identity and Access Management – to irrefutably authenticate the user / application and the device
User and network behaviour analytics – to understand the relative behaviours of the user and the network they are coming from and highlight any unusual behaviour compared to a pre-established baseline which may indicate a compromised identity
Endpoint security – to ensure that the endpoint itself is clean and will not act as a conduit for an attacker to gain unauthorised access to data
Encryption – to prevent ‘sniffing of traffic on the wire’
Scoring – establishing a ‘score’ based on the perimeters above that will then determine whether access can be granted or not
Apart from the above key components, the following are needed as well:
File system permissions – needed in order to implement role based access controls
Auditing and logging – to provide monitoring capabilities in case unauthorised access is achieved
Granular role based access controls – to ensure access is on a ‘need to know basis only’
Supporting processes – all of the above needs to be supported by adequate operational procedures, processes and a conducive security framework so that the model operates as intended
Mindset and organisational change management – since Zero Trust is a shift in security thinking, a mindset change managed by robust change management is required to ensure the successful implementation of Zero Trust in an organisation.
1.5. Challenges with Zero Trust
So Zero Trust sounds pretty awesome, right? So why haven’t organisations adopted it fully?
As with any new technology or philosophy, there are always adoption challenges. Zero Trust is no different. At a high level, the key challenges in my experience are:
Change resistance – Zero Trust is a fundamental shift in the way security is implemented. As a result, there is resistance from many who are simply used to the traditional perimeter based security model
Technology focus as opposed to strategy focus – since Zero Trust is a model that will impact the entire enterprise, it requires careful planning and a strategy to implement this. Many are still approaching security from the angle that if we throw enough technology at it, it will be fine. Unfortunately, this thinking is what will destroy the key principles of Zero Trust
Legacy systems and environments – legacy systems and environments that we still need for a variety of reasons were built around the traditional perimeter based security model. Changing them may not be easy and in some cases may stop these systems from operating
Time and cost – Zero Trust is an enterprise wide initiative. As such, it requires time and investment, both of which may be scarce in an organisation.
1.6. Suggested Approach to Zero Trust
Having discussed some challenges to adopting a Zero Trust model above, let’s focus on an approach that may allow an organisation to implement a Zero Trust model successfully:
1. Take a multi-year and multi-phased approach – Zero Trust takes time to implement. Take your time and phase the project out to spread the investment over a few financial years
2. Determine an overall strategy and start from there – since Zero Trust impacts the entire enterprise, a well-crafted strategy is critical to ensure success. A suggested, phased approach is:
a. Cloud environments, new systems and digital transformation are good places to start – these tend to be greenfield and should be more conducive to a new security model
b. Ensure zero trust is built into new systems, and upgrades or changes – build Zero Trust by design, not by retrofit. As legacy systems are changed or retired, a Zero Trust model should be part of the new deployment strategy
c. Engage a robust change management program – mindset adjustment through good change management
3. Take a risk and business focus – this will allow you to focus on protecting critical information assets and justify the investments based on ROI and risk mitigation
4. Ensure maintenance and management of the new environment – as with everything, ensure your new Zero Trust deployment is well maintained and managed and does not degrade over time.
To summarise, Zero Trust is a security philosophy and architecture that will change the way traditional perimeter based security is deployed. A key component of it is the control plane that instructs the data plane to provide access to data. Zero Trust dictates that access can only be granted once the user / application and device are irrefutably authenticated and even then this access is provided on a ‘need to know’ basis only. Micro-segmentation is a key technology component of Zero Trust implementation and this paper has stated other key technology components and processes that are needed to implement Zero Trust adequately. This paper has discussed some of the challenges with implementing Zero Trust which include change resistance as well as legacy systems. The paper then provided an approach to implementing Zero Trust which included taking a phased approach based on a sound strategy underpinned by a risk and business focused approach.
Article | June 21, 2021
Remote working and cybersecurity risks, unfortunately, go hand in hand. As the COVID-19 pandemic appears to be far from over, cyber threats to individuals and businesses continue to loom large. The only solution at the moment is to invest in robust technology solutions that protect your network and to train employees in cybersecurity so that they develop healthy remote working practices.
If you allow a bulk of your employees to work remotely, it is important to adopt a few basic habits to protect your devices and your business network from cyber criminals.
Here’s a quick look at a few basic tips for remote workers that can go a long way in enhancing the overall security posture of your organisation.
Passwords provide the first line of defense against unauthorized access to your devices and personal information. By creating a strong, unique password, you increase protection levels tremendously. You make it more challenging for cybercriminals to gain access and disrupt your systems networks.
Rule number two is never to ignore those little pop-up windows that tell you that software updates are available for your device. Once you get such a notification, be sure to install the latest software as soon as possible. Timely software updates (including antivirus updates) help patch security flaws and safeguard the computer system.
Are you busy with your work and don’t like to be distracted by such notifications? We highly suggest you encourage your employees to select auto-update for software on both mobile devices and computers. It will help you and your staff to prevent problems caused by delayed system updates.
Article | March 2, 2020
Seemingly everywhere you turn these days there is some announcement about 5G and the benefits it will bring, like greater speeds, increased efficiencies, and support for up to one million device connections on a private 5G network. All of this leads to more innovations and a significant change in how we do business. But 5G also creates new opportunities for hackers.Gartner predicts that 66% of organizations will take advantage of these benefits and adopt 5G by 2020 — with 59% of them planning to use 5G to support the Internet of Things across their business. Already, manufacturers including Nokia, Samsung, and Cisco have either started developing 5G enterprise solutions or have publicly announced plans to do so. In the enterprise, full deployment of private 5G networks will take time, as it requires significant investments to upgrade legacy network infrastructures, observers say. In the meantime, there are instances of devices in the workplace already operating on a 5G network.
Article | April 1, 2020
The COVID-19 pandemic brings heightened awareness to the importance of a robust and stable communications network. Zyxel Communications is helping service providers across the globe ensure that their networks provide the necessary connectivity and cyber security for their communities to function during these difficult times. As more people are forced to work and study from home, the impact on the network is quite profound. OpenVault reports a 41% increase in bandwidth consumption during normal business hours. This health crisis points to the importance of good network connectivity wherever you live. COVID-19 brings the true nature of the digital divide into real context.