Think banking cybersecurity is just a technology issue? Think again

| June 8, 2016

article image
Banks are in cyber attackers’ crosshairs. And now, there are even more risks to manage as the Internet of Things spans new organizations, services and data sources. Fewer than of banking execs indicate their organization will increase investment in crisis readiness in 2016. The Threat Gap that exists between investments in technology, people, and processes to mitigate emerging threats continues to widen. Meeting these challenges means creating a new mindset — and skill set.

Spotlight

DRS

As the Information and Communications Technology (ICT) industry continues to expand, so do the skills of cyber-crime syndicates, malware engineers, intellectual property thieves and agents of corporate espionage. These external threats are often given access by unsuspecting internal sources, aggravating the business’ vulnerability.

OTHER ARTICLES

New Cyber Threat Index Shows Industries Are Under Attack in Uncertain Times

Article | April 16, 2020

It has been more than a month since businesses around the world started to implement contingencies in response to the Coronavirus. The Cyber Threat Index Report by Imperva Research Labs tracks changes in traffic and attack trends across multiple industries and countries. This month’s edition looks at how COVID-19 is affecting all industries across the globe. Our researchers have found that while some sectors are experiencing a dip in the number of attacks, on the whole they remain consistent. As the chart below shows, certain sectors have experienced a significant increase in attacks over the past few months: attacks on gaming are up seven percent, food & beverages are up six percent, and financial services are up 3 percent.

Read More

Protecting against Cybersecurity Threats when Working from Home

Article | March 11, 2020

With the spread of the novel coronavirus (COVID-19), many organizations are requiring or permitting employees to work remotely. This post is intended to remind employers and employees that in the haste to implement widespread work-from-home strategies, data security concerns cannot be forgotten.Employers and employees alike should remain vigilant of increased cybersecurity threats, some of which specifically target remote access strategies. Unfortunately, as noted in a prior blog post, cybercriminals will not be curtailing their efforts to access valuable data during the outbreak, and in fact, will likely take advantage of some of the confusion and communication issues that might arise under the circumstances to perpetrate their schemes. Employees working from home may be accessing or transmitting company trade secrets as well as personal information of individuals. Inappropriate exposure of either type of data can lead to significant adverse consequences for a company.

Read More

MERGING AND SORTING FILES IN LINUX: EASIER THAN YOU THINK

Article | November 24, 2020

There are several reasons to choose Linux over other operating systems such as Windows and macOS. Linux is an open-source, secure, and very lightweight operating system consuming minimal system resources. It also has huge community support and has a ton of distros (variants) to choose from. While we have already posted a bunch of articles on simple file handling methods in Linux, sending email from the terminal, and more, we are going to walk you through the simple yet efficient process of merging and sorting files in Linux. Just like with any other operation in Linux, there are several ways you can sort and merge the files in Linux. Choosing which method to use solely depends on the user and based on what needs to be accomplished. In this article, we will show you some easy yet powerful file sorting and merging methods in Linux while pointing out the differences and importance of each method. Cat Cat is one of the easiest and simple commands in Linux that can combine multiple files into one. All you have to do is list all the files that you wish to merge into a single file along with the new file name you wish to create. If a file with the name of the final output already exists, then it will be overwritten by the one being created. Here is a very simple implementation of cat command. $ cat file1 file2 file3 file4 > Newfile However, if you wish to append information from multiple files into an already existing file, you can use ">>" instead of ">." Below is an example $ cat file1 file2 file3 file4 >> Newfile The cat command can also be used in many ways. It is also one of the most flexible and simple ways of reading the content of the file. To view the content of a file called file1, simply use the below command. $cat file1 Join Join is another command to merge the data of multiple files. While it is as easy and simple as the cat command is, it has a catch. Unlike cat, join cannot just simple combine the data of multiple files. Instead, the command allows users to merge the content of multiple files based on a common field. For instance, consider that two files need to be combined. One file contains names, whereas the other file contains IDs, and the join command can be used to combine both these files in a way that the names and their corresponding IDs appear in the same line. However, users need to make sure that the data in both these files have the common key field with which they will be joined. There are several reasons to choose Linux over other operating systems such as Windows and macOS. Linux is an open-source, secure, and very lightweight operating system consuming minimal system resources. It also has huge community support and has a ton of distros (variants) to choose from. While we have already posted a bunch of articles on simple file handling methods in Linux, sending email from the terminal, and more, we are going to walk you through the simple yet efficient process of merging and sorting files in Linux. Just like with any other operation in Linux, there are several ways you can sort and merge the files in Linux. Choosing which method to use solely depends on the user and based on what needs to be accomplished. In this article, we will show you some easy yet powerful file sorting and merging methods in Linux while pointing out the differences and importance of each method. azure linux Shutterstock Cat Cat is one of the easiest and simple commands in Linux that can combine multiple files into one. All you have to do is list all the files that you wish to merge into a single file along with the new file name you wish to create. If a file with the name of the final output already exists, then it will be overwritten by the one being created. Here is a very simple implementation of cat command. $ cat file1 file2 file3 file4 > Newfile However, if you wish to append information from multiple files into an already existing file, you can use ">>" instead of ">." Below is an example $ cat file1 file2 file3 file4 >> Newfile The cat command can also be used in many ways. It is also one of the most flexible and simple ways of reading the content of the file. To view the content of a file called file1, simply use the below command. $cat file1 Join Join is another command to merge the data of multiple files. While it is as easy and simple as the cat command is, it has a catch. Unlike cat, join cannot just simple combine the data of multiple files. Instead, the command allows users to merge the content of multiple files based on a common field. For instance, consider that two files need to be combined. One file contains names, whereas the other file contains IDs, and the join command can be used to combine both these files in a way that the names and their corresponding IDs appear in the same line. However, users need to make sure that the data in both these files have the common key field with which they will be joined. Syntax $join [OPTION] FILE1 FILE2 Example: Assume file1.txt contains ... 1 Aarav 2 Aashi 3 Sukesh And, file2.txt contains ... 1 101 2 102 3 103 The command ... $ join file1.txt file2.txt will result in: 1 Aarav 101 2 Aashi 102 3 Sukesh 103 Note that by default, the join command takes the first column as the key to join multiple files. Also, if you wish to store the final data of the two files joined into another file, you can use this command: $ cat file1.txt file2.txt > result.txt Paste The paste command is used to join multiple files horizontally by performing parallel merging. The command outputs the lines from each file specified, separated by a tab as a delimiter by default to the standard output. Assume there is a file called numbers.txt containing numbers from 1 to 4. And there are another two files called countries.txt and capital.txt containing four countries and their corresponding capitals, respectively. The command below will join the information of these three files and will be separated by a tab space as a delimiter. $ paste numbers.txt countries.txt capital.txt However, you can also specify any delimiter by adding a delimiter option to the above command. For example, if we need the delimited to be "-" you can use this command: $ paste -d “-” numbers.txt countries.txt capital.txt Sort The sort command in Linux, as the name suggests, is used to sort a file as well as arrange the records in a particular order. Sort can also be paired with multiple other Linux commands such as cat by simply joining the two commands using a pipe "|" symbol. For instance, if you wish to merge multiple files, sort them alphabetically and store them in another file, you can use this command: $ cat file1.txt file2.txt file3.txt | sort > finalfile.txt There are several reasons to choose Linux over other operating systems such as Windows and macOS. Linux is an open-source, secure, and very lightweight operating system consuming minimal system resources. It also has huge community support and has a ton of distros (variants) to choose from. While we have already posted a bunch of articles on simple file handling methods in Linux, sending email from the terminal, and more, we are going to walk you through the simple yet efficient process of merging and sorting files in Linux. Just like with any other operation in Linux, there are several ways you can sort and merge the files in Linux. Choosing which method to use solely depends on the user and based on what needs to be accomplished. In this article, we will show you some easy yet powerful file sorting and merging methods in Linux while pointing out the differences and importance of each method. azure linux Shutterstock Cat Cat is one of the easiest and simple commands in Linux that can combine multiple files into one. All you have to do is list all the files that you wish to merge into a single file along with the new file name you wish to create. If a file with the name of the final output already exists, then it will be overwritten by the one being created. Here is a very simple implementation of cat command. $ cat file1 file2 file3 file4 > Newfile However, if you wish to append information from multiple files into an already existing file, you can use ">>" instead of ">." Below is an example $ cat file1 file2 file3 file4 >> Newfile The cat command can also be used in many ways. It is also one of the most flexible and simple ways of reading the content of the file. To view the content of a file called file1, simply use the below command. $cat file1 Join Join is another command to merge the data of multiple files. While it is as easy and simple as the cat command is, it has a catch. Unlike cat, join cannot just simple combine the data of multiple files. Instead, the command allows users to merge the content of multiple files based on a common field. For instance, consider that two files need to be combined. One file contains names, whereas the other file contains IDs, and the join command can be used to combine both these files in a way that the names and their corresponding IDs appear in the same line. However, users need to make sure that the data in both these files have the common key field with which they will be joined. Syntax $join [OPTION] FILE1 FILE2 Example: Assume file1.txt contains ... 1 Aarav 2 Aashi 3 Sukesh And, file2.txt contains ... 1 101 2 102 3 103 The command ... $ join file1.txt file2.txt will result in: 1 Aarav 101 2 Aashi 102 3 Sukesh 103 Note that by default, the join command takes the first column as the key to join multiple files. Also, if you wish to store the final data of the two files joined into another file, you can use this command: $ cat file1.txt file2.txt > result.txt Paste The paste command is used to join multiple files horizontally by performing parallel merging. The command outputs the lines from each file specified, separated by a tab as a delimiter by default to the standard output. Assume there is a file called numbers.txt containing numbers from 1 to 4. And there are another two files called countries.txt and capital.txt containing four countries and their corresponding capitals, respectively. The command below will join the information of these three files and will be separated by a tab space as a delimiter. $ paste numbers.txt countries.txt capital.txt However, you can also specify any delimiter by adding a delimiter option to the above command. For example, if we need the delimited to be "-" you can use this command: $ paste -d “-” numbers.txt countries.txt capital.txt There are several other options available for the paste command, and more information can be found here. Sort The sort command in Linux, as the name suggests, is used to sort a file as well as arrange the records in a particular order. Sort can also be paired with multiple other Linux commands such as cat by simply joining the two commands using a pipe "|" symbol. For instance, if you wish to merge multiple files, sort them alphabetically and store them in another file, you can use this command: $ cat file1.txt file2.txt file3.txt | sort > finalfile.txt The above command is going to merge the files, sort the overall content, and then store it in the finalfile.txt You can also use the sort command to simply sort a single file containing information: $ sort file.txt The command above does not change or modify the data in file.txt and is, therefore, just for displaying the sorted data on the console. There are several other ways of merging and sorting files and data in the Linux operating system. What makes Linux unique is its ability to pair up multiple commands to achieve its purpose. Once users start to make themselves acquainted with these commands, it can save a lot of time and effort while performing tasks with more precision and efficiency.

Read More

Here’s What Universities Need to Know About Cyber-Attacks

Article | June 1, 2021

Over the last year, the education delivery model has changed rapidly. Universities have learnt to operate entirely remotely and now that learning may resume in person, a hybrid education model will likely continue. The transition from physical to online models happened so quickly that it left many IT networks exposed to serious harm from outside forces. With a hybrid model, there is likely a widening attack surface area. A recent spate of attacks suggests that cyber-criminals are taking notice of the seemingly infinite weaknesses in learning centers defenses. But why? One of the primary reasons is that universities operate large corporate-sized networks, but without the budgets to match. Add to that, teachers and students aren’t given training to use and connect their technology in a safe way. To avoid falling victim to devastating cyber-attacks which often have dire consequences, we share three lessons universities need to quickly take on board. Your Research is Valuable to Cyber-Criminals There is a hefty price tag on some of the research conducted by universities, which makes it particularly attractive to cyber-criminals. The University of Oxford’s Division of Structural Biology was targeted in February by hackers snooping around, potentially in search of information about the vaccine the university has worked on with AstraZeneca. It’s not just gangs of cyber-criminals targeting research facilities, last year Russian state backed hackers were accused by official sources in the US, UK and Canada of trying to steal COVID-19 vaccine and treatment research. With world-leading research hidden in the networks of universities, its unsurprising that last year over half (54%) of universities surveyed said that they had reported a breach to the ICO (Information Commissioner’s Office). The research conducted by many UK universities makes them an attractive target for financially motivated cyber-criminals and state-sponsored hackers in search of valuable intellectual property. To add insult to injury, ransomware attackers are doubling their opportunity for pay off by selling off the stolen information to the highest bidder, causing a serious headache for the victims while potentially increasing the value of their pay-out. Personal Information of Students and Staff Can Easily Fall into the Wrong Hands Based on tests of UK university defenses, hackers were able to obtain ‘high-value’ data within two hours in every case. In many cases, successful cyber-attacks are followed by not only a ransom note demanding payment for the recovery of frozen or stolen data, but also the added threat of sharing any sensitive stolen information with the public.

Read More

Spotlight

DRS

As the Information and Communications Technology (ICT) industry continues to expand, so do the skills of cyber-crime syndicates, malware engineers, intellectual property thieves and agents of corporate espionage. These external threats are often given access by unsuspecting internal sources, aggravating the business’ vulnerability.

Events